DEBOSSING CODERS

DESIGNED TO STAMP ON VIRTUALLY ANY SUBSTRATE WITH NO INK OR RIBBON

Open Date Discreet Markers are debossing machines designed for stamping batch or date codes into a wide variety of materials. Available as either hot or cold units our debossers will suit most requirements in virtual all environments.

main features

  • Available in hot or cold versions

  • Slide in type holder with magnetic lock

  • Interlocked type holder access door

  • All Stainless Steel, bespoke designed air cylinder

  • Available with or without electronic control unit

  • Economic to run

  • Quality engineered product

  • Compact and simple to install

specifications

 Impression Area 

 Operating speed 

 Cycle time (minimum) 

 Dwell time 

 Operating air pressure 

 

 Free air consumption 

 Air connections 

 Air cylinder 

Guarding 

Hot Debosser

(as above plus)

Temperature range 

 Warm-up time 

Electronic control unit

 Operating voltage 

50 x 25mm

(1.97" x 0.98")

Up to 1,200 per min.

30 Milliseconds

12 to 650 Milliseconds

4.0 to 6.8 bar

(60 to 100 PSI)

228cc @ 6.8 bar

6mm (0.24") Push-in

40 Ø x 13mm

(1.57" Ø x 0.51")

Fully guarded with

interlocked door

Variable 70°C to 220°C

Approx. 4 mins

100/240v AC, 50/60Hz

FOR FULL MODEL SPECIFICATIONS
DOWNLOAD THE BROCHURE
WHAT IS DEBOSSING?

Debossing is the process of stamping a mark without using ink or printing ribbon, into a receptive substrate material. Debossed marks are permanent and can only be removed by destroying the substrate. As no ink or ribbon is used, debossers are extremely economical to run.

HOW DOES DEBOSSING WORK?

Open Date Debossing Coders are available as either cold or hot units. The Cold Debosser will suit most requirements.  The Hot Debosser is used where enhanced code definition is required or the substrate material is not particularly receptive.  This machine heats the type characters so that when stamped into the substrate, it will temporarily soften and then accurately retain the form of the numbers and letters.

TYPICAL APPLICATIONS

Open Date Debossing Coders are debossing machines designed for stamping batch or date codes into a wide variety of materials; these include labels, carton board and some films and use sharp faced (chisel edged) steel or brass type characters. They can be fitted to any reel fed packaging or labelling equipment and most cartoning machines, using either standard or custom designed mounting frames. Debossing coders provide a simple, in-line, virtually maintenance free coding facility.

 IDEAL SOLUTION FOR  ....
FOOD & BEVERAGE
PHARMACEUTICAL
COSMETICS
OTHER