Open Date

The Sprint Series are easy to use, automatic Hot Foil overprinters. They are cost effective yet manufactured to very high standards. Three models are available. The 'Sprint' has a print area of 60 x 25mm and is ideally suited to date and batch coding. The 'Sprint Major' offers a print area of 100 x 50mm and the 'Sprint 100' offers 100 x 100mm. These larger units and can be used for simple graphics/text or for spanning over more than one label or pack.

Features of the Sprint Series

Variety of print areas	Stainless steel air motor
Left and right hand versions<	Optional digital controller
Proven reliability	Variable temp. control
Full safety spec.

Compact size

The Sprint series of Hot Foil overprinters are comparatively small for their print capabilities allowing simple installation on to any reel fed packaging or labelling machinery in conjunction with either standard, or custom designed mounting frames.

SPECIFICATIONS	SPRINT	SPRINT MAJOR	SPRINT 100
Print Area	60 x 25mm	100 x 50mm	100 x 100mm
Operating Speed €“ Maximum	700 per minute	300 per minute	150 per minute
Foil Width - Maximum	61mm	108mm	110mm
Cycle Time €“ Minimum	75 milliseconds	175 milliseconds	375 milliseconds
Air Cylinder	40 dia x 13mm	70 dia x 13mm	100 dia x 19mm
Free Air Consumption per Cycle	228cc @ 6.8 bar	718cc @ 6.8 bar	940cc @ 6.8 bar
Print Head Dimensions (h,w,d)	195 x 195 x 155mm	195 x 250 x 210mm	222 x 277 x 200mm
Print Head Weight	4.65kg	8.5kg	14kg
Warm-up time from cold	Typically 5 minutes	Typically 8 minutes	Typically 6 minutes
End of Foil Alarm	Optional
Foil Capacity	305m (1000 ft)
Foil Feed Adjustment	Positive, accurate and infinitely adjustable
Air Pressure	4.0 to 6.8 bar (60 to 100 PSI)
Dwell time range	12 - 650 milliseconds
Temperature Range	Variable between 70 and 220 degrees C
Operating Voltage	110 or 240v AC, 50/60 Hz
Control Unit Dimensions	240 x 145 x 66mm